Archive for the ‘Apprentice Theory’ Category
Its old, I re-posted it, and its still relevant! Read it
A scratcher was born
(from THIS MIGHT STING A BIT: 101 THINGS YOUR TATTOO ARTIST FORGOT TO TELL YOU AND YOU WERE PROBABLY TOO AFRAID TO ASK – by CR Jordan)
Four more weeks till this book goes to print. Just doing final edits and cover design. I know – I am like 6 months behind what I promised everyone!
Should you become a tattoo Apprentice?
Is it Hard to become a tattoo apprentice? YES!
Are there opportunities to learn how to tattoo in your local area? YES
Do you have to look for them? YES
Here is a post from the TeachMeToTattoo.com Forum
Tattoo Help from the TeachMeToTattoo.com Forum
I am new to this forum and have found it really useful! There doesnt seem to be the bitchiness that you normally find on these forums.
I just wanted to clarify the theory of “Stroke Length”. In the book it says that a liner should be fast and hard hitting with a long stroke length. So the machine will run fast due to a stiffer front spring and softer rear spring, it will hit hard due to the higher voltage? with regards to the stroke length, the book says that the greater the angle of deflection between the a-bar nipple and the falcrum point the longer the stroke length. so i should bend the a-bar upwards? i also read about “zeroing the spring out” does this mean i should bend the front spring upwards more so that there is still a dime gap when the a-bar is stressed? I have a Ronnie Starr mini liner the a-bar nipple is high but when i zero out the front spring and re-adjust so it is just touching the contact screw and then pull the a-bar down the gap is massive. should i be zeroing out the front spring?
REPLY:
While a softer rear spring on a tattoo machine will speed it up – it will do so at a lower voltage.
Those general rules apply to keeping every thing else the same.
Meaning if you change just 1 variable – then you will have the change noticeable.
For a typical liner – you will want a longer stroke, and a heavy to medium hit.
But this depends on what type of lining you do.
Longer stroke would involve the distance that the A-bar nipple moves (ie: the figure 8 or “ghost) while running.
There are a few ways to achieve this.
Add tension to your rear spring – and open the contact screw is the best – easiest way in my opinion.
(so by adding tension to the rear spring you could simply add a heavier gauge metal spring and not bend – or you could use a lighter gauge and bend it a bit more to increase tension)
Lots of ways to add tension -
I prefer to not line so much when I tattoo, but when I do – I like a hard fast liner w/ medium to short stroke. But I have found that most artists prefer long stroke medium speed – medium to hard hit.
I try to tattoo very fast though – it is really a personal style and preference thing.
In my school of thought – you should not be a slave to the machine.
You should know how to make your machine run a certain way
and know which way you like it to run for a certain job you want to accomplish..
this way you do not have any rules for tattooing – except the ones you create yourself.
hope this helps!
If you enjoy the book: Basic Fundamentals of Modern Tattoo – please help me out by posting a review on http://www.amazon.com/Basic-Fundamentals-Modern-Tattoo-Jordan/product-reviews/0615281478/ref=sr_1_1_cm_cr_acr_txt?ie=UTF8&showViewpoints=1&qid=1309086277&sr=8-1
Why share so much about my own personal tattoo timeline?
The reason that I feel it is important to share my journey in tattooing with people who are thinking about getting a tattoo (or even thinking about becoming tattoo artists) is because most clients don’t seem to grasp how hard it is to break into this industry properly and how much effort and time is dedicated by those who want to learn this craft. Most artists literally spend years trying to learn this skill in an unpaid apprenticeship where the only payment is little nuggets of information that are like tools in themselves. So much time is dedicated that when it is all added up, the tattoo artist is really just trying to break even by making up for lost time during his first few years of tattooing professionally.
Excerpt from my new book: “This Might Sting a Bit” 101 Things your tattoo artist forgot to tell you & you were probably too afraid to ask
Tattoo DVDs are in the works
Here are a few sneak peaks from the 5 DVD set of instructional DVDs that will be released in the next few months from Tattoo Books Online LLC. The first DVD will be out next month “The Tattoo Machine” it is packed with information about your tattoo machine…
Machine Assembly, Metals Used, All parts described, how to take apart and build tattoo machines, how to maintain your tattoo machine, Electrical, Mechanical , Magnetic parts of tattoo machine, How to tune your machine, tips and tricks to do ANYTHING with your machine you want, all about your power supply, Coil Basics, Arm Bar Basics, Tuning, Tuning, Tuning! Throw and Gap, Front Spring Rear Spring, Capacitor, and as an added bonus “Needle Making” and what needles are perfect for what job will also be on this tattoo DVD.
Sneak peak at the graphics featured in the DVD
Tattoo apprenticeships are not for everyone
So, I have to let you all know that Tattoo Apprentice John is no more at Top Rocker Tattoo. Being a tattoo apprentice is not easy – and due to a bunch of reasons – John will not be blogging anymore, nor will he be learning to tattoo at Top Rocker Tattoo. I was really hoping it would work out with him…
Unrelated note:
I also want to share this link: http://www.stevesototattoo.com/steve-soto-tattoo-portfolio If you know who this artist is then you know why I am sharing this link. If you do not know who he is, then check him out…ASAP! Amazing tattoo artist. These tattoos make you want to look closer and see if you can find any imperfections. Very tedious and clean work by Steve Soto.





